قطع بلاستك • جديد • موصل

للبيع جديد والنوعيه. ممتازه المكان موصل اخذتهن لسيارتي وبعت السياره وماشديتهن نص مكتوب في الصور: - PAINTING INSTRUCTIONS Matte (PP/TPO/PC) Unprimed Plastic Parts or Components. 1. Clean the surface of part with mild soap and water and allow to air dry. 2. AP/PROCOM recommends that you check with your paint manufacture for any need of a sealer or other steps required in preparation of applying the primer. Please give enough flash time between primer coats as recommended by your paint manufacture to achieve a professional and durable primer coat. 3. Using a scuff pad or wet sandpaper (1500-1800 grit) scuff the entire surface that will be primed lightly, being certain to hit all surfaces, edges and enclosures. 4. Clean surface with water only & then wipe with lint-free cloth and allow to air dry thoroughly before proceeding. 5. For any greasy surface apply a Water Base Plastic Cleaner on a lint-free cloth and thoroughly wipe the greasy area clean. Avoid spreading the cleaner to unaffected areas. Once grease is completely removed, repeat step 3 allowing to air dry thoroughly before proceeding. 6. AP/PROCOM recommends to check with your paint manufacture for the need of a sealer application and the proper application of the base coat. Please give enough flash time between coats as recommended by your paint manufacture to achieve a professional and durable paint finish. 7. According to paint manufacturer's directions apply clear coat as necessary. If you need further assistance or information, please contact ([email protected])